About Master Flow™ Ridge Vent - Aluminum
The GAF Master Flow™ Ridge Vent is easy to install and helps provide ventilation at the most effective location on the roof - the ridge. Durable aluminum construction with built-in baffle helps ventilate the attic while helping to prevent moisture infiltration. Each vent provides 21.5 sq. in. (per lin. ft.) of net free ventilating area (NFA).
This product can be used to comply with certain FORTIFIED Roof™ requirements. Visit gaf.com/fortified and current FORTIFIED Home™ Standard available at fortifiedhome.org for details. Applicable in the U.S. only.
Features & Benefits
-
GREAT PERFORMANCE
Wide, free-flow drainage areas -
EASY INSTALLATION
10’ aluminum sections with pre-punched nail holes install quickly with Master Flow® Joint Straps and End/Connector Plug accessories -
GOOD VENTILATOR
Provides 21.5 sq. in. per lineal foot (45,500 m2/lm) of net free area
Eligible accessory product in the Attic Ventilation Category of GAF Residential Enhanced and WindProven™ Limited Warranties*
*15-year WindProven™ Limited Wind Warranty covers GAF Shingles with LayerLock® Technology only and requires the use of GAF Starter Strips, Roof Deck Protection, Ridge Cap Shingles, and Leak Barrier or Attic Ventilation. See GAF Roofing System Limited Warranty for complete coverage and restrictions. Visit gaf.com/LRS for qualifying GAF products. For installations not eligible for the WindProven Limited Wind Warranty, see GAF Shingleand Accessory Limited Warranty, Master Flow™Ventilation Products Limited Warranty,or Master Flow™ Powered Ventilation Products Limited Warranty (depending on product) for complete coverage and restrictions.
Product Documentation
-
-
.jpg?width=100)
Master Flow Aluminum Ridge Vent Installation Instructions TRILINGUAL RESMF400 (7-23)
Installation Instructions and Guides
-
-
